Engine Fastener Market: Current Analysis and Forecast (2022-2030)


Emphasis on Type (Bolt & Nut, Screw, and Stud), Material (Steel, Aluminum Alloy, Nickel Cobalt Alloy, Titanium Alloy, and Others), Thread Type (Rolled Thread Fasteners and Cut Thread Fasteners), Vehicle Type (Passenger Vehicle and Commercial Vehicle), and Region/Country.







Report ID:



  Get a Sample
Report Description
Table of content
Research Methodology
Reviews (0)

Report Description

Engine Fastener Market
Engine Fastener Market

The engine fastener market is expected to grow at a steady CAGR of around 5.5% during the forecast period.

Fasteners are a tool that is used to mechanically hold objects together, typically fasteners form a nonpermanent joint where the component can be separated without damage. The power and reliability of an engine greatly depend on the quality of the fasteners and in automotive manufacturing, it’s very important to ensure that the engine bolt assembly is capable enough of working in high pressure and stress environments.

The growth rate of the fastener industry is directly attributed to the growth of the automobile sector where around 23% of the total fastener produced worldwide is consumed by the automobile industry which represents the highest market share in the industry and is working in favor of the fastener industry due to the positive outlook of automotive sector owing to a huge spike in the demands across segment be it passenger vehicle or commercial vehicle. The growth is mainly driven by the fact that a huge amount of pent-up demand is coming across the board after COVID-19, where consumers are keen on owning a personal vehicle rather than using public transport. Furthermore, demand for electric vehicles is also increasing fast due to increased awareness, subsidies from governments, and the cost benefits of owning an electric vehicle. Additionally, emerging economies are generating huge demand for automobiles owing to rising income, increased mobility, rapid urbanization, and increased economic activities due to huge investments in infrastructure by governments. For instance, on March 2022, Japan in a bilateral meeting with its Indian counterpart announced that it will invest USD 42 billion over the course of 5 years for supporting India’s urban infrastructure development and a high-speed railway based on its bullet train technology.

Some of the major players operating in the market include MacLean-Fogg; Chicago Nut & Bolt; Tachart Ltd; THE PHILLIPS SCREW COMPANY; Garton Ltd; A&A Manufacturing; Wagner Tuning Ltd; Anglian Fasteners Ltd; OptiTorque Technologies LLC; and Fastco Industries, Inc

Insights Presented in the Report

 Based on the material, the market is segmented into steel, aluminum alloy, nickel cobalt alloy, titanium alloy, and others. Among these steel and steel alloys as material for fastener holds a significant market share owing to the fact that steel is the most commonly used material for fastener production due to its high degree of formability, tensile strength, and durability. Additionally, steel fasteners are relatively economical and inexpensive to produce, they also have a high degree of corrosion resistance which does not decrease from deformation and long-term use.

 “Asia Pacific dominated the engine fastener market in 2021.”

The engine fastener market in the Asia Pacific region held the largest market share and is expected to maintain its growth throughout the forecast period. Major countries in the Asia Pacific like India, China, Vietnam, Thailand, etc are going to be the biggest market for engine fasteners owing to the increasing economic growth rate in these countries which are some of the fastest-growing economies in the world, driving the consumption with increasing income, and automobile sectors have been proven to be the biggest beneficiaries of these trends as it has happened in past in the developed world. Moreover, China is still the world’s biggest automobile market followed by India and other Asia Pacific countries owing to its huge population and increased mobility with the working population on the rise thus generating a huge demand for engine fasteners. Furthermore, increased government spending on developing new infrastructure has increased the rate of urbanization which is also becoming a major driver for the demand in the automobile sector. For instance, on February 2023, the Indian government presented a budget where they announced a whopping 37.4% increase in capital expenditure on infrastructure to USD 125 billion for the year 2023-24.

Engine Fastener Market Report Coverage

Engine Fastener Market
Engine Fastener Market

Reasons to buy this report:

  • The study includes market sizing and forecasting analysis validated by authenticated key industry experts.
  • The report presents a quick review of overall industry performance at one glance.
  • The report covers an in-depth analysis of prominent industry peers with a primary focus on key business financials, product portfolios, expansion strategies, and recent developments.
  • Detailed examination of drivers, restraints, key trends, and opportunities prevailing in the industry.
  • The study comprehensively covers the market across different segments.
  • Deep dive regional level analysis of the industry.


Customization Options:

The global engine fastener market can further be customized as per the requirement or any other market segment. Besides this, UMI understands that you may have your own business needs, hence feel free to connect with us to get a report that completely suits your requirements.



You can also purchase parts of this report. Do you want to check out a section wise
price list?

1.1.Market Definitions
1.2.Main Objective


2.1.      Research Process of the Engine Fastener Market
2.2.      Research Methodology of the Engine Fastener Market
2.3.      Respondent Profile   




7.1.    Bolt & Nut
7.2.    Screw 
7.3.    Stud 
8.1.      Steel  
8.2.      Aluminum alloy 
8.3.      Nickel cobalt alloy
8.4.      Titanium alloy 
8.5.      Others 
9.1.    Rolled thread fastener
9.2.    Cut thread fastener
10.1.  Passenger vehicle
10.2.  Commercial vehicle
11.1.   North America Engine Fastener Market
11.1.1.    U.S.   
11.1.2.    Canada   
11.1.3.    Rest of North America 
11.2.   Europe Engine Fastener Market 
11.2.1.    Germany   
11.2.2.    U.K.   
11.2.3.    France   
11.2.4.    Italy   
11.2.5.    Spain   
11.2.6.    Rest of Europe  
11.3.   Asia-Pacific Engine Fastener Market 
11.3.1.    China   
11.3.2.    India   
11.3.3.    Japan   
11.3.4.    Rest of Asia-Pacific  
11.4.   Rest of the World Engine Fastener Market
12.1.  Market Drivers 
12.2.  Market Challenges
12.3.  Impact Analysis 
15.1.  Demand Side Analysis
15.2.  Supply Side Analysis
19.1.  Competitive Landscape 
19.1.1.    Porters Fiver Forces Analysis
20.1.      MacLean-Fogg  
20.2.      Chicago Nut & Bolt 
20.3.      Tachart Ltd  
20.5.      Garton Ltd  
20.6.      A&A Manufacturing 
20.7.      Wagner Tuning Ltd 
20.8.      Anglian Fasteners Ltd 
20.9.      OptiTorque Technologies LLC
20.10.   Fastco Industries, Inc 

Research Methodology

Research Methodology for the Engine Fastener Market Analysis (2022-2030)

Analyzing the historical market, estimating the current market, and forecasting the future market of the global engine fastener market were the three major steps undertaken to create and analyze the adoption of engine fasteners in major regions globally. Exhaustive secondary research was conducted to collect the historical market numbers and estimate the current market size. Secondly, to validate these insights, numerous findings and assumptions were taken into consideration. Moreover, exhaustive primary interviews were also conducted, with industry experts across the value chain of the global engine fastener market. Post assumption and validation of market numbers through primary interviews, we employed a top-down/bottom-up approach to forecasting the complete market size. Thereafter, market breakdown and data triangulation methods were adopted to estimate and analyze the market size of segments and sub-segments of the industry pertains to. Detailed methodology is explained below:

Analysis of Historical Market Size

Step 1: In-Depth Study of Secondary Sources:

Detail secondary study was conducted to obtain the historical market size of the engine fastener market through company internal sources such as annual reports & financial statements, performance presentations, press releases, etc., and external sources including journals, news & articles, government publications, competitor publications, sector reports, third-party database, and other credible publications.

Step 2: Market Segmentation:

After obtaining the historical market size of the engine fastener market, we conducted a detailed secondary analysis to gather historical market insights and share for different segments & sub-segments for major regions. Major segments are included in the report as type, material, thread type, and vehicle type. Further country-level analyses were conducted to evaluate the overall adoption of testing models in that region.

Step 3: Factor Analysis:

After acquiring the historical market size of different segments and sub-segments, we conducted a detailed factor analysis to estimate the current market size of the engine fastener market. Further, we conducted factor analysis using dependent and independent variables such as type, material, thread type, and vehicle type of the engine fastener market. A thorough analysis was conducted for demand and supply-side scenarios considering top partnerships, mergers and acquisitions, business expansion, and product launches in the engine fastener market sector across the globe.

Current Market Size Estimate & Forecast

Current Market Sizing: Based on actionable insights from the above 3 steps, we arrived at the current market size, key players in the global engine fastener market, and market shares of the segments. All the required percentage shares split and market breakdowns were determined using the above-mentioned secondary approach and were verified through primary interviews.

Estimation & Forecasting: For market estimation and forecast, weights were assigned to different factors including drivers & trends, restraints, and opportunities available for the stakeholders. After analyzing these factors, relevant forecasting techniques i.e., the top-down/bottom-up approach were applied to arrive at the market forecast for 2030 for different segments and sub-segments across the major markets globally. The research methodology adopted to estimate the market size encompasses:

  • The industry’s market size, in terms of revenue (USD) and the adoption rate of the engine fastener market across the major markets domestically
  • All percentage shares, splits, and breakdowns of market segments and sub-segments
  • Key players in the global engine fastener market in terms of products offered. Also, the growth strategies adopted by these players to compete in the fast-growing market


Market Size and Share Validation

Primary Research: In-depth interviews were conducted with the Key Opinion Leaders (KOLs) including Top Level Executives (CXO/VPs, Sales Head, Marketing Head, Operational Head, Regional Head, Country Head, etc.) across major regions. Primary research findings were then summarized, and statistical analysis was performed to prove the stated hypothesis. Inputs from primary research were consolidated with secondary findings, hence turning information into actionable insights.

Split of Primary Participants in Different Regions

Engine Fastener Market
Engine Fastener Market

Market Engineering

The data triangulation technique was employed to complete the overall market estimation and to arrive at precise statistical numbers for each segment and sub-segment of the global engine fastener market. data was split into several segments & sub-segments post studying various parameters and trends in the areas of the type, material, thread type, and vehicle type in the global engine fastener market.

The main objective of the Global Engine Fastener Market Study

The current & future market trends of the global engine fastener market were pinpointed in the study. Investors can gain strategic insights to base their discretion for investments on the qualitative and quantitative analysis performed in the study. Current and future market trends determined the overall attractiveness of the market at a regional level, providing a platform for the industrial participant to exploit the untapped market to benefit from a first-mover advantage. Other quantitative goals of the studies include:

  • Analyze the current and forecast market size of the engine fastener market in terms of value (USD). Also, analyze the current and forecast market size of different segments and sub-segments
  • Segments in the study include areas of the type, material, thread type, and vehicle type.
  • Define and analysis of the regulatory framework for the engine fastener industry
  • Analyze the value chain involved with the presence of various intermediaries, along with analyzing customer and competitor behaviors of the industry
  • Analyze the current and forecast market size of the engine fastener market for the major region
  • Major countries of regions studied in the report include Asia Pacific, Europe, North America, and the Rest of the World
  • Company profiles of the engine fastener market and the growth strategies adopted by the market players to sustain in the fast-growing market
  • Deep dive regional level analysis of the industry


You can also purchase parts of this report. Do you want to check out a section wise
price list?


There are no reviews yet.

Be the first to review “Engine Fastener Market: Current Analysis and Forecast (2022-2030)”

Your email address will not be published.